Table of Contents
Advertisement
LOCAL MANAGEMENT
5.2 ACCESSING LOCAL MANAGEMENT
After ensuring proper terminal configuration, and correct physical
cable connections, you can access ETWMIM Local Management.
To access Local Management:
1. Turn the terminal on. The ETWMIM Password screen, Figure 5-1,
appears.
2. Enter your Password. The factory default password for super-user
access is a carriage return <CR>.
Note: Your password is one of the community names specified in the
Community Name Table. Access to certain Local Management
capabilities depends on the degree of access accorded to that community
name. See Section 5.3.
Page 5-2
ETWMIM LOCAL MANAGEMENT
Cabletron ETWMIM Revision 00.00.00
CABLETRON Systems, Incorporated
35 Industrial Way, P.O. Box 5005
Rochester, NH 03867-5005 USA
(603) 332-9400
(c) Copyright CABLETRON Systems Inc. 1994
ETWMIM F/W Version: 00.00.00
Boot EPROM Version: 00.00.00
ETWMIM Board Rev#: 0
Enter USER PASSWORD:
Figure 5-1. ETWMIM Password Screen
Advertisement
Table of Contents
