Ethernet Port Interface Modules - Cabletron Systems EMME User Manual

CHAPTER 2: NETWORK PLANNING AND CONFIGURATION

2.3.1 Ethernet Port Interface Modules

For an additional connection to the Ethernet network, the TPRMIM-20/
22, TPRMIM-33/36, and CXRMIM utilize the Cabletron Systems
Ethernet Port Interface Modules (EPIMs), Figure 2-2, that allow you to
connect the unit directly to:
• Thin-net cable from the Coaxial Interface Module (EPIM-C).
• Unshielded twisted pair cable from the 10BASE-T Twisted Pair
Interface Module (EPIM-T).
• AUI cable, to an external transceiver, from the AUI Interface Module
(EPIM-A).
• AUI cable directly from the Transceiver Interface Module with dual
internal transceivers (EPIM-X).
• Multi-Mode Fiber Optic Cable, with SMA or ST connectors, from the
Fiber Optic Interface Modules (EPIM-F1/ EPIM-F2).
• Single Mode Fiber Optic Cable, with ST connectors, from the single
mode Fiber Optic Interface Module (EPIM-F3).
EPIM-C
EPIM-T
Figure 2-2. Ethernet Port Interface Modules (EPIMs)
Page 2-4
TERM
EPIM-C
EPIM-A
LNK
EPIM-T
EPIM-X
RX
PWR
EPIM-A
EPIM-F1/F2
RX
SQE
EPIM-X
EPIM-F3
EMME USER'S GUIDE
TX
LNK
EPIM-F1/F2
TX
LNK
EPIM-F3