Table of Contents
Advertisement
Cabletron Systems ETWMIM Local Management provides unique
management and control capabilities for Cabletron Systems
ETWMIM. Local Management supplies the tools to manage the
ETWMIM and all of its attached segments. You can:
•
assign an IP address and subnet mask
•
select a default gateway
•
set interface parameters for the COM 2 port
•
control access to the ETWMIM through the community names
established in the Community Names Table
•
designate which Network Management Workstations receive
traps from the device
•
configure the optional T1-SRM WAN interface
•
navigate through the Management Information Base (MIB),
and manage the objects within it from a remote location. Given
the appropriate security level, you can access the MIB from the
ETWMIM through SNMP Tools.
5.1 TERMINAL CONFIGURATION
The Local Management terminal must be a VT220, VT320 or
equivalent. You must configure the terminal as described in Chapter 2
in order to communicate with Local Management. For instructions on
setting up your terminal, refer to your terminal manual.
CHAPTER 5
LOCAL MANAGEMENT
Page 5-1
Advertisement
Table of Contents
