Setting The Data Compression Field - Cabletron Systems ETWMIM User Manual

9. If you selected NO LMI:
a. The FR DLCI Address field and the FR Circuit State field
appear.
b. Use the arrow keys to highlight the FR DLCI Address field.
c. Enter the DLCI address. Valid DLCI values are decimal
numbers in the range of 16 to 991. For this manual
configuration technique, the DLCI values are provided by the
WAN service provider (i.e. AT&T, Sprint, MCI, NYNEX, etc.).
d. Use the arrow keys to highlight the FR Circuit State field.
e. Press the Return key to select ACTIVE, INACTIVE, or
INVALID.
f. Use the arrow keys to highlight the SAVE command.
g. Press the Return key or press F6. The message "SAVE
DONE!" appears and the changes are saved to memory

5.8.4 Setting the Data Compression Field

To set the Data Compression field:
Note: This feature is not implemented. It will be functional in future
releases of the ETWMIM.
1. Use the arrow keys to highlight the Data Compression field.
2. Press the Return key to toggle between Yes and NO. Select the
desired setting.
3. Use the arrow keys to highlight the SAVE command.
4. Press the Return key or press F6. The message "SAVE DONE!"
appears. The ETWMIM Local Management automatically assigns
an Active Port Number to the Interface number and the changes
are saved to memory.
LOCAL MANAGEMENT
Page 5-29