Table of Contents
Advertisement
Chapter 3: VLAN Configuration
3.4.8
Paging Through the VLAN List
To display additional VLANs that do not display in the current VLAN
List as shown on the screen, use the NEXT or PREVIOUS commands
located at the bottom of the screen, as follows:
The NEXT and PREVIOUS fields will only display if there are
NOTE
further VLAN List entries to page through.
1. To display the next screen, use the arrow keys to highlight NEXT.
Press ENTER to view the entries on the next screen.
2. To display the previous screen, use the arrow keys to highlight
PREVIOUS. Press ENTER to view the entries on the previous screen.
3.5
PORT ASSIGNMENT CONFIGURATION SCREEN
The Port Assignment Configuration screen enables the user to select a
mode of operation for each port and to assign a Port VLAN Identification
(PVID) to each port.
To access the Port Assignment Configuration screen from the 802.1Q
VLAN Configuration Menu screen, use the arrow keys to highlight the
PORT ASSIGNMENT CONFIGURATION menu item and press
ENTER. The Port Assignment Configuration screen, Figure 3-6, displays.
3-14
802.1Q VLAN User's Guide
Advertisement
Table of Contents
