Epim-F1 And Epim-F2 (Multimode Fiber Optic Ports - Cabletron Systems ETWMIM User Manual

EPIM SPECIFICATIONS
A.2.2 EPIM-F1 and EPIM-F2 (Multimode Fiber Optic Ports)
Internal Transceiver:
Type:
Parameter
Receive Sensitivity:
Max Receive Power:
Transmitter Power Into –
50/125 m fiber:
62.5/125 m fiber:
100/140 m fiber:
Bit Error Rate:
Note: The above transmitter power and receive sensitivity levels
represent Peak Power Levels after optical overshoot. You must use a
Peak Power Meter to correctly compare the above values to those you
measure on any particular port. If you measure Power Levels with an
Average Power Meter, you must subtract 3 dBm from the measurement
to correctly compare measured values to the above values
(e.g., -29.5 dBm peak = -32.5 dBm average).
Page A-8
Cabletron Systems FOT-F™ Fiber Optic
Transceiver
EPIM-F1:
EPIM-F2:
Figure A-2. EPIM-F1 and EPIM-F2
SMA fiber optic ports
ST fiber optic ports
Typical
-29.5 dBm
-8.2 dBm
-13.0 dBm
-10.0 dBm
-7.0 dBm
-10
Better than 10