Table of Contents
Advertisement
B.3 STANDARD LOCAL DOWNLOAD
Table B-1 provides a step by step procedure for downloading the
firmware image file. This section provides specific MIB OIDs, their
names, and the required setting for proper image file download. Refer
to your specific MIB walking tool documentation for instructions on
how to set MIB OID strings.
The Download OIDs for Cabletron products reside in Cabletron
enterprise MIBs (group 52). The specific OIDs necessary to perform an
image file download reside in the common download group under
ctDL (Cabletron Download). The full OID string to reach this group is:
When performing the steps in Table B-1, keep the following in mind:
•
You must follow the steps in order.
•
Enter the IP address of the rarp server in standard dotted
decimal notation (e.g., 132.177.118.24).
•
Enter the FULL path to the image file in the
ctDLTFTPRequest OID, including the name of the image file
(e.g., c:\tftpboot\etw.hex).
Table B-1. Standard Download Procedure
OID Name
Step
(1).
ctDLForceOnBoot
(2).
ctDLCommitRAMToFlash
(3).
ctDLTFTPRequestHost
(4).
ctDLTFTPRequest
(5).
ctDLInitiateColdBoot
DOWNLOADING AN IMAGE FILE
1.3.6.1.4.1.52.4.1.5.8.1
OID Number
1.3.6.1.4.1.52.4.1.5.8.1.1.0
1.3.6.1.4.1.52.4.1.5.8.1.2.0
1.3.6.1.4.1.52.4.1.5.8.1.4.0
1.3.6.1.4.1.52.4.1.5.8.1.5.0
1.3.6.1.4.1.52.4.1.5.8.1.3.0
Data
SNMP
Type
OID Data
integer
integer
IP
Enter the IP address of the
address
rarp server.
string
Enter the path to the image
(ASCII)
file.
integer
1
1
1
Page B-5
Advertisement
Table of Contents
