EPIM SPECIFICATIONS
A.2.5 EPIM-A and EPIM-X (AUI Ports)
Interface Connector:
Type:
Figure A-5. EPIM-A and EPIM-X (AUI Ports)
Pin
1 Logic Ref.
2 Collision +
3 Transmit +
4 Logic Ref.
5 Receive +
6 Power Return
7 No Connection
8 Logic Ref.
Connector Shell: Protective Ground
A.3 CONNECTING AN EPIM TO THE ETHERNET NETWORK
The procedure for connecting Ethernet segments to the unit vary
depending on the media type and ports you connect. Refer to the
following list and perform the procedure described in the subsections
that apply:
Page A-12
DB-15 Port (female connector for EPIM-A,
male connector for EPIM-X).
15 position D type receptacle
•
EPIM-A
•
EPIM-T
•
EPIM-F1, F2, F3
•
EPIM-C
•
EPIM-X
Pin
9 Collision -
10 Transmit -
11 Logic Ref.
12 Receive -
13 Power (+12 Vdc)
14 Logic Ref.
15 No Connection
A.3.1
A.3.2
A.3.3
A.3.4
A.3.5