Table of Contents
Advertisement
RTS (Request to Send)
•
On - Indicates the ETWMIM is ready to send data to the DCE.
•
Off - Indicates the ETWMIM is not ready to send data to the
DCE.
DSR (Data Set Ready)
•
On - Indicates that the DCE is ready to operate, or that the
Force DSR True field (refer to the WAN Physical Configuration
screen) is set to YES (on).
•
Off - A valid DSR is not being received from the DCE. Check
the cabling or check if the DCE is powered up.
DTR (Data Terminal Ready)
•
On - ETWMIM is operational and ready to generate or receive
control signals (such as RTS or CTS).
•
Off - ETWMIM is not operational.
USING LANVIEW
Page 4-7
Advertisement
Table of Contents
