Cabletron Systems ETWMIM User Manual page 89

Note: You must terminate each segment attached to the
tee-connector. If you do not attach a segment to one of the female
connections on the tee-connector, then a terminator must be placed
on that connection.
c. Attach another thin-coax segment or a terminator to the other
female connector on the tee-connector.
When internal termination switch
is set to OFF ( ):
Connect BNC tee-connector to port.
Attach a terminator or terminated
thin-net segment to one female
connector of tee-connector.
Connect a terminated thin-net
segment to other female connector
of tee-connector.
Attach thin-net segment directly to BNC
connector when internal termination
switch is set to ON ( ).
Figure A-9. The EPIM-C
EPIM SPECIFICATIONS
Page A-19