Getting Help; Overview; Etwmim Features - Cabletron Systems ETWMIM User Manual

INTRODUCTION

1.2 GETTING HELP

If you need additional support relating to the ETWMIM, or if you have
any questions, comments, or suggestions relating to this manual,
contact Cabletron Systems Technical Support. Before calling, please
have the following information ready:
• The product type (e.g., ETWMIM)
• The product serial number.
Note: Locate the serial number on the ETWMIM front panel.
You can contact Cabletron Systems Technical Support by:
Phone:
CompuServe:
Internet mail:

1.3 OVERVIEW

The ETWMIM module resides in an MMAC hub, and acts as an
interface between various Ethernet and Token Ring LANs, as well as
providing a synchronous serial WAN port. Cabletron also offers an
optional T1-SRM module for the ETWMIM. The T1-SRM provides an
RJ-48C interface to provide wide area network connectivity.
The ETWMIM can bridge for up to 26 ports at one time — 2 local
networks (1 Ethernet and 1 Token Ring), and up to 24 WAN timeslots
using the optional T1-SRM.

1.4 ETWMIM FEATURES

LANVIEW
LANVIEW is Cabletron Systems' visual diagnostic and monitoring
system. LEDs on the ETWMIM front panel, and optional connection
modules, indicate module and physical layer status.
Page 1-2
Monday through Friday
between 8 A.M. and 8 P.M. EST
at (603) 332-9400.
GO CTRON from any ! prompt
support@ctron.com