Cabletron Systems ETWMIM User Manual page 35

RCV (Receive)
• Flashing - Indicate the ETWMIM is receiving a data packet
through the Ethernet port. The flash is pulse-stretched for
viewing effect.
• Off - Indicates the ETWMIM is not receiving data packets.
XMT (Transmit)
• Flashing - Indicates a data packet is being transmitted
through the Ethernet port. The flash is pulse stretched for
viewing effect.
• Off - Indicates the ETWMIM is not transmitting data packets.
CLN (Collision)
• Flashing - Indicates a detected collision. The flash is
pulse-stretched for viewing effect.
• Off - No collisions detected.
EPIM (Ethernet Port Interface Module)
• On - Indicates the Ethernet Connection Switch (SW4) is set to
the forward (EPIM) position.
• Off - Indicates the SW4 switch is set to the rear (backplane)
position.
USING LANVIEW
Page 4-3