Cabletron Systems ETWMIM User Manual page 97

Table B-2. Runtime Download Procedure
Step OID Name
(1). ctDLTFTPRequestHost
(2). ctDLTFTPRequest
(3). ctDLOnLineDownload
(4) ctDLOperStatus
(This OID monitors the
progress of the Runtime
Download.)
If you selected forceDownLoadReset at Step 3, then DO NOT CONTINUE, you have completed all
necessary settings.
If you selected forceDownLoad at Step 3, then you can reset the ETWMIM at a later time. You can
reset the ETWMIM remotely using the ctDLInitiateColdBoot OID described at Step 5 or manually using
the Reset Button or Power Cycle.
(5). ctDLInitiateColdBoot
DOWNLOADING AN IMAGE FILE
OID Number
1.3.6.1.4.1.52.4.1.5.8.1.4.0
1.3.6.1.4.1.52.4.1.5.8.1.5.0
1.3.6.1.4.1.52.4.1.5.8.1.16.0
1.3.6.4.1.52.4.1.5.8.1.17.0
1.3.6.1.4.1.52.4.1.5.8.1.3.0
Data SNMP OID Data
Type
IP Enter the IP address of the
address rarp server.
string Enter the path to
(ASCII) the image file.
integer 1 = Default setting (normal
operation).
2 = forceDownLoad. The
new image downloads to
Flash memory. The ETW-
MIM does not use the new
image until you press the
Reset button.
3 = forceDownLoadReset.
The new image downloads
to Flash memory. The
ETWMIM automatically
resets upon completion of
the download.
Integer 2 = Indicates that a TFTP
download request has been
received but has not yet
been activated.
3 = Indicates normal opera-
tion. The download started
and finished normally and
no reset was specified or a
download has not been
started.
4 = Indicates that a down-
load is in progress.
5 = Indicates that download
was started but has termi-
nated due to an error.
integer 1
Page B-7