Table of Contents
Advertisement
Installation Site Requirements
Installation Site Requirements
You need to have 3–4 inches of clearance on the switch I/O port side of the 7100G-Series switch
depending upon the cabling used.
See
Appendix
7100G-Series switch installation.
The installation site must be within reach of the network cabling and meet the requirements listed
below:
•
Appropriate grounded power receptacles must be located within 7 feet of the site.
•
A temperature of between 5°C (41°F) and 40°C (104°F) must be maintained at the installation
site with fluctuations of less than 10°C (18°F) per hour.
Unpacking the 7100G-Series Switch
Unpack the 7100G-Series switch as follows:
1.
Open the box and remove the packing material protecting the 7100G-Series switch.
Save the shipping box and materials in the event the unit must be reshipped.
2.
Remove and set aside the RJ45-to-DB9 converter, anti-static wrist strap, adhesive feet (for flat
surface placement), and power cord retention clips.
The 7100G-Series switch does not include screws for attaching the 7100G-Series switch to rack
posts.
3.
Verify the contents of the carton as listed in the
Table 2-1 Contents of 7100G-Series Switch
Item
7100G-Series chassis
RJ45 management cable
RJ45-to-DB9 converter
Anti-static wrist strap
Adhesive rubber feet
Power cord retention clips
7100G-Series Quick Reference
4.
Inspect the 7100G-Series switch for any signs of physical damage.
If there are any signs of damage, DO NOT install the 7100G-Series switch; instead, contact
Enterasys Networks. Refer to
2-2 Installation
E,
Environmental Guidelines
Caution: To ensure proper ventilation and prevent overheating, leave a minimum clearance space
of 5.1 cm (2.0 in.) at the front and rear of the device.
Precaución: Para asegurar una buena ventilación y evitar que el sistema se sobrecaliente, deje un
espacio mínimo de 5.1 cm (2 pulgadas) con respecto el anverso y reverso del aparato.
for environmental guidelines relating to the
Table
Number
1
1
1
1
4
2
1
"Getting Help"
on page xvii for details.
2-1.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
