Carrier SmartVu Control Manual page 18

Condenser entering
water pressure
transducer (Option)
Condenser leaving
water pressure
transducer (Option)
Temperature sensors:
The system uses electronic sensors to measure and control the temperatures in the unit.
There are three types of temperature sensors, 5K thermistor, 10K thermistor and RTD (three wirings,
MINCO S100308) based on the IOB channel configurations.
Sensor
Entering chilled water
temperature sensor
Leaving chilled water
temperature sensor
Entering condenser
water temperature
sensor
Leaving condenser
water temperature
sensor
Evap refrig liquid
temperature sensor
Cond refrig liquid
tempura sensor
Comp discharge
temperature sensor
Low speed motor end
bearing temperature
sensor
Low speed comp end
bearing temperature
sensor
SRDC-UG-2-14-000
19 Series Carrier®
SmartVu
Controls IOM
This is an optional transducer, and it
measures the pressure of condenser entering
water
This is an optional transducer, and it
measures the pressure of condenser leaving
water
Detailed Description
measures the temperature of entering
evaporator water.
measures the temperature of leaving
evaporator water.
measures the temperature of entering
condenser water.
measures the temperature of leaving
condenser water.
measures the temperature of evaporator
ref rigerant liquid.
measures the temperature of condenser
ref rigerant liquid.
measures the Compressor discharge
temperature.
measure the low speed motor end bearing
temperature
measure the low speed compressor end
bearing temperature
REVISION
–
TM
2.3
DATE PAGE
Dec 4, 2020 18 OF 168
Optional for 19XR2~E/V/D,
19XR6/7 and 19DV
Optional for 19XR2~E/V/D,
19XR6/7 and 19DV
Chiller Conf iguration
Standard for
19XR2~E/V/D,
19XR6/7 and 19DV
Standard for
19XR2~E/V/D,
19XR6/7 and 19DV
Standard for
19XR2~E/V/D,
19XR6/7 and 19DV
Standard for
19XR2~E/V/D,
19XR6/7 and 19DV
Standard for
19XR2~E/V/D,
19XR6/7 and 19DV
Standard for 19DV
Standard for
19XR2~E/V/D,
19XR6/7 and 19DV
Standard for 19XR6/7
Standard for 19XR6/7
18