Mec Operator Policy - Mec Speed Level 2684 RT Service And Parts Manual

MEC O
PERATOR
NOTE: The best method to protect yourself and others from injury or death is to use common sense. If you are unsure
of any operation, don't start until you are satisfied that it is safe to proceed and have discussed the situation with
your supervisor.
Service personnel and machine operators must understand and comply with all warn-
ings and instructional decals on the body of the machine, at the ground controls, and
platform control console.
MODIFICATIONS OF THIS MACHINE FROM THE ORIGINAL DESIGN AND
SPECIFICATIONS WITHOUT WRITTEN PERMISSION FROM MEC ARE STRICTLY
FORBIDDEN. A MODIFICATION MAY COMPROMISE THE SAFETY OF THE
MACHINE, SUBJECTING OPERATOR(S) TO SERIOUS INJURY OR DEATH.
MEC's policies and procedures demonstrate our commitment to Quality and our relent-
less ongoing efforts towards Continuous Improvement, due to which product specifica-
tions are subject to change without notice.
Any procedures not found within this manual must be evaluated by the individual to
assure oneself that they are "proper and safe."
Your MEC Aerial Work Platform has been designed, built, and tested to provide many
years of safe, dependable service. Only trained, authorized personnel should be
allowed to operate or service the machine.
MEC, As Manufacturer, Has No Direct Control Over Machine Application And Opera-
tion. Proper Safety Practices Are The Responsibility Of The User And All Operating
Personnel.
If there is a question on application and/or operation contact:
May 2010
Page IV
P
OLICY
MEC Aerial Work Platform
1401 S. Madera Avenue
Kerman, CA 93630 USA
Ph: 1-800-387-4575
www.mecAWP.com
"Speed Level™ Sigma Lifts" Service and Parts Manual