1. Manuals
  2. Brands
  3. Mec Manuals
  4. Lifting Systems
  5. Nano10-XD
  6. Operator's manual

Mec Nano10-XD Operator's Manual

Hide thumbs Also See for Nano10-XD:
Table of Contents

Advertisement

Quick Links

Download this manual
Operator's Manual
- XD
™
Nano10
ART_5973
Serial Number Range
Part # 96250
18000000 - Up
January 2023

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Nano10-XD and is the answer not in the manual?

Questions and answers

Related Manuals for Mec Nano10-XD

Summary of Contents for Mec Nano10-XD

  • Page 1 Operator’s Manual - XD ™ Nano10 ART_5973 Serial Number Range Part # 96250 18000000 - Up January 2023...

  • Page 2: Revision History

    January 2023 Revision History Date Reason for Update December 2022 New Release MEC Aerial Work Platforms 1401 S. Madera Avenue, Kerman, CA 93630 USA Toll Free: 1-877-632-5438 Phone: 1-559-842-1500 Fax: 1-559-842-1520 info@MECawp.com www.MECawp.com Page i - XD - Operator’s Manual Nano10 ™...
  • Page 3 January 2023 Table of Contents Section 1 - Introduction  Introduction � � � � � � � � � � � � � � � � � � � � � Section 2 - Safety Safety � � � �...
  • Page 4 Your MEC Aerial Work Platform has been designed, built, and tested to provide safe, dependable service. Only authorized, trained and qualified personnel shall be allowed to operate or service the machine.
  • Page 5 For your safety and the safety of those around you, you must operate your machine as instructed in this manual. MEC designs aerial work platforms to safely and reliably position personnel, along with their necessary tools and materials, at overhead work locations. The owner/user/operator of the machine should not accept responsibility for the operation of the machine unless properly trained.
  • Page 6 Section 2 - Safety January 2023 Safety Alert Symbols & Fall Protection MEC manuals and decals use symbols, colors and signal words to help you recognize important safety, operation and maintenance information. RED and the word DANGER – Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

  • Page 7: Specifications

    Section 3 - Specifications January 2023 Specifications Specifications Indoor 16.4 ft 5.0 m Height, Working Maximum Outdoor 13.5 ft 4.3 m Indoor 9.8 ft 3.0 m Height, Platform Maximum Outdoor 7.5 ft 2.3 m Height, Stowed Maximum 5.3 ft 1.60 m Indoor Maximum Personnel Outdoor...
  • Page 8 Section 4 - Safety Rules and Hazards January 2023 Safety Rules Safety Rules Failure to obey the instructions and safety rules in this manual will result in death or serious injury. Do Not Operate Unless: • You learn and practice the principles of safe machine operation contained in this operator’s manual.

  • Page 9: Maintenance Safety

    Section 4 - Safety Rules and Hazards January 2023 Maintenance Safety BEFORE PERFORMING MAINTENANCE ON THE LIFT ACTUATOR, SUPPORT THE PLATFORM WITH A FORKLIFT NEVER perform work on the machine with the platform elevated without placing forklift prongs around 1 inch (25 mm) under the platform to support the platform as is shown below. 1 in Forklift Prongs...
  • Page 10 Section 4 - Safety Rules and Hazards January 2023 Hazards Electrocution Hazard This machine is not electrically insulated and will not provide protection from contact with or proximity to electrical current. Maintain safe distances from electrical power lines and apparatus in ART_5651 accordance with applicable governmental regulations and the following chart.
  • Page 11 Section 4 - Safety Rules and Hazards January 2023 5000 V Max. volts Higher voltage 20000 V Min. volts 15000 V 10000 V 5000 V Lower voltage Min. volts (b) Avoid simultaneous contact across (a) Affected area areas of high potential difference CLEARANCES FROM LIVE AERIAL CONDUCTORS Spotter required...
  • Page 12 Section 4 - Safety Rules and Hazards January 2023 Tip-over Hazard Occupants, equipment and materials must not exceed the maximum platform capacity. Maximum Platform Capacity Rated Indoors Maximum Occupants Outdoors Maximum Platform Load 500 lbs (227 kg) Work Area Safety Do not raise the platform unless the machine is on a firm, level surface.
  • Page 13 Section 4 - Safety Rules and Hazards January 2023 Do not use the machine as a crane. Do not place or attach fixed or overhanging loads to any part of this machine. Do not push the machine or other objects with the platform. Do not operate the machine with the chassis trays open.
  • Page 14 Section 4 - Safety Rules and Hazards January 2023 Operation on Slopes Hazard ART_5987 Do not drive the machine on a slope that exceeds the slope and side slope rating of the machine. Slope rating applies to machines only in the stowed position. Maximum Slope Maximum Side Slope Rating Stowed...
  • Page 15 Section 4 - Safety Rules and Hazards January 2023 of the crane have been locked out and/or precautions have been taken to prevent any potential collision. No stunt driving or horseplay while operating a machine. Do not lower the platform unless the area below is clear of personnel and obstructions.
  • Page 16 Section 4 - Safety Rules and Hazards January 2023 maintenance personnel should access compartments. Access by the operator is only advised when performing a pre-operation inspection. All compartments must remain closed and secured during operation. Battery Safety Burn Hazard Batteries contain acid. Always wear protective clothing and eye wear when working with batteries.
  • Page 17 Section 4 - Safety Rules and Hazards January 2023 Transportation and Storage Hazard Charge the battery as soon as receiving the machine or after long distance transportation. When the battery is stored for a long time, it needs to be charged regularly. Failure to charge in time may permanently damage the battery.
  • Page 18 Section 5 - Xtra Deck Deployment and Stowing January 2023 Xtra Deck Deployment and Stowing Xtra Deck Deployment and Stowing Warning! Only 1 person is allowed on the machine when the Xtra Deck is deployed 1. Pull up the yellow guardrails until they snap into place.
  • Page 19 Section 5 - Xtra Deck Deployment and Stowing January 2023 Important: Maximum capacity - 1 person - 250 lbs (113Kg) The control box may be placed on the upper telescopic guardrail and the machine controlled as instructed in this manual. 4.

  • Page 20: Section 6 - Components And Controls

    Section 6 - Components and Controls January 2023 Component Locations Component Locations Platform Controller Platform Guard Rails Manuals Case Lanyard Anchorage Points Xtra Step Main Platform Platform Entry Gate Electric Cylinder Assembly Scissor Arms Tie-Down/Lift Points Forklift Pockets Chassis Battery Charger Emergency Down Cable (Inside Lower Controls) Ground Control...

  • Page 21: Upper Controls

    Section 6 - Components and Controls January 2023 Upper Controls ART_5806 ALWAYS be aware of the machine’s position and of your surroundings before activating any control function Control Description Function Enable Switch for LIFT & DRIVE & STEER functions. Function Enable Switch Thumb Rocker Switch Press the thumb rocker switch in either direction to activate steer function.

  • Page 22: Lower Controls

    Section 6 - Components and Controls January 2023 Lower Controls OUTDOOR INDOOR ART_6012 ALWAYS be aware of the machine’s position and of your surroundings before activating any control function Control Description Turn the Function Enable Button right and hold to be able to enable the Platform Up Function Enable Button / Down Switch function.
  • Page 23 Section 7 - Pre-Operation & Workplace Inspection January 2023 Pre-operation Inspection Pre-operation Inspection Do Not Operate Unless: • You learn and practice the principles of safe machine operation contained in this operator’s manual. 1 Avoid hazardous situations Know and understand the safety rules before going on to the next section 2.
  • Page 24 Section 7 - Pre-Operation & Workplace Inspection January 2023 Pre-operation Inspection Report Be sure that the operator’s manual is complete, legible and in the storage container located in the platform. Be sure that all decals are legible and in place. See Decals section. Check for battery fluid leaks and proper fluid level.
  • Page 25 Section 7 - Pre-Operation & Workplace Inspection January 2023 Workplace Inspection Do Not Operate Unless: • You learn and practice the principles of safe machine operation contained in this operator’s manual. 1 Avoid hazardous situations Know and understand the safety rules before going on to the next section 2.

  • Page 26: Maintenance Inspection Report

    Section 8 - Maintenance Inspection Form January 2023 Maintenance Inspection Report Maintenance Inspection Report NANO 10 SCISSOR Fleet Equipment Number Date Inspector Name Inspector Co Model Number Address Serial Number Hour Meter Signature Machine Owner & address Maintain all service records in accordance with ANSI A9224-2019 *If an inspection receives an “N”, remove from service.

  • Page 27: Function Tests

    Section 9 - Function Tests January 2023 Function Tests Function Tests Do Not Operate Unless: • You learn and practice the principles of safe machine operation contained in this operator’s manual. 1 Avoid hazardous situations Know and understand the safety rules before going on to the next section 2.
  • Page 28 Section 8 - Maintenance Inspection Form January 2023 10. Do not press the function enable button. 11. Press the Platform Up/Down switch. • Result: The platform should not raise. 12. Do not press the Platform Up/Down switch. 13. Press the function enable button right and hold. •...
  • Page 29 Section 8 - Maintenance Inspection Form January 2023 Test the Steering Note: When performing the steer and drive function tests, stand in the platform facing the steer end of the machine. 31. Press the drive function select button. The indicator light should turn on. 32.
  • Page 30 Section 8 - Maintenance Inspection Form January 2023 the machine up onto them. 45. Raise the platform approximately 3.3 ft (1 m) from the ground. • Result: The platform should stop and the tilt alarm will sound at 180 beeps per minute. The platform controls LED readout should display LL.
  • Page 31 Section 8 - Maintenance Inspection Form January 2023 measure the platform height. • Result: The platform continued to rise to a height of about 9.8 ft (3 m). 65. Turn the Indoor/Outdoor switch to Outdoor mode. • Result: The alarm should sound. 66.

  • Page 32: Section 10 - Operating Instructions

    Section 10 - Operating Instructions January 2023 Operating Instructions Operating Instructions Do Not Operate Unless: • You learn and practice the principles of safe machine operation contained in this operator’s manual. 1 Avoid hazardous situations Know and understand the safety rules before going on to the next section 2.
  • Page 33 Section 10 - Operating Instructions January 2023 Drive and steer functions are not available from the ground controls. Operation from Platform 1. Be sure the battery pack is connected before operating the machine. 2. Turn the key switch to platform control. 3.
  • Page 34 Section 10 - Operating Instructions January 2023 To determine the slope grade Measure the slope with a digital inclinometer OR use the following procedure. You will need: • Carpenter’s level • Straight piece of wood, at least 3.3 ft (1 m) long •...

  • Page 35: Battery And Charger Instructions

    Section 11 - Battery and Charger Instructions January 2023 Battery and Charger Instructions Battery and Charger Instructions Observe and Obey: • Do not use an external charger or booster battery. • Charge the battery in a well-ventilated area. • Use proper AC input voltage for charging as indicated on the charger. Charging Instructions Serviceable for Lead Batteries 1.

  • Page 36: Section 12 - Transport And Lifting Instructions

    Section 12 - Transport and Lifting Instructions January 2023 Transport and Lifting Transport and Lifting Observe and Obey: • Common sense and planning must be applied to control the movement of the machine when lifting it with a crane or forklift. Only qualified aerial lift operators should move the machine on or off the truck.
  • Page 37 Section 12 - Transport and Lifting Instructions January 2023 Lifting the Machine with a Forklift Be sure the controls and component trays are secure. Remove all loose items on the machine. Fully lower the platform. The platform must remain lowered during all loading and transport procedures.
  • Page 38 Section 13 - Storage January 2023 Storage Storage Observe and Obey: The storage of the machine shall be as follows. Incorrect storage may affect the performance • and service life of the machine. 1. The machine should be stored indoors and the ground should be firm and level. If the machine should be stored outdoors then the machine should be covered to prevent damage from water and other environment factors.
  • Page 39 Nano10-XD 1/5/2023 Section 14 - Decals January 2023 Decals Decals Both Sides 14 15 14 15 Page 36 - XD - Operator’s Manual Nano10 ™...
  • Page 40 Section 14 - Decals January 2023 95919 Qty. - 2 95208 Qty. - 1 96307 Qty. - 1 94362 Qty. - 4 96222 Qty. - 1 90732 Qty. - 2 42534 Qty. - 1 90750 Qty. - 1 95389 Qty. - 1 41639 Qty.

  • Page 41: Serial Plate

    Section 14 - Decals January 2023 Serial Plate Serial Plate Location The serial plate is attached to the machine at the time of manufacture. Important information about the machine is recorded on the serial plate. ART_5986 Serial Plate Description MODEL NUMBER: Identifies the machine. MFG DATE: Month / Year of manufacture.
  • Page 42 MEC Parts Order Form Phone: 559-842-1523 Fax: 559-400-6723 Email: Parts@mecawp.com Please Fill Out Completely: Date: Ordered By: Account: Your Fax No: Bill to: Ship to: Purchase Order Number Ship VIA ** All orders MUST have a Purchase Order Number **Fed Ex shipments require Fed Ex account number...

  • Page 43: Limited Owner Warranty

    MEC Aerial Platform Sales Corp. and is found upon inspection by MEC Aerial Platform Sales Corp. to be defective in material and/or workmanship. MEC Aerial Platform Sales Corp. shall not be liable for any consequential, incidental or contingent damages whatsoever.
  • Page 44 MEC Aerial Work Platforms 1401 S. Madera Avenue, Kerman, CA 93630 USA Toll Free: 1-877-632-5438 Phone: 1-559-842-1500 Fax: 1-559-842-1520 info@MECawp.com www.MECawp.com...

This manual is also suitable for:

5973

Table of Contents