90263
1
BASE CONTROLS
CONTROL
1 Lift/Lower Switch
2 Circuit-breaker
3 Base/Off/Platform
Selector Switch
4 Battery Gauge
(Optional)
5 Emergency Stop
Button
6 Hour Meter
Page 2-4
July 2005
OPERATOR CONTROLS
3
5
2
DESCRIPTION
Use to control the lift and lowering of the platform from the base
panel, when "BASE" position is selected as the primary control
station.
Pops out when there is excessive electrical load in the 12-volt
control circuit. Push in to reset.
Select "BASE" position to control operation of machine using
the base controls. Select "PLATFORM" position to control opera-
tion of machine using the platform console.
NOTE: A key shall be provided for European machines and will be
removable in "PLATFORM" position only.
Indicates percent of charge left in batteries.
Use to stop all functions in an emergency. Push for emergency
stop. To reset turn clockwise.
Indicates total elapsed time the machine has been operated.
2047ES / 2647ES / 3247ES Operator's Manual
4
6
Courtesy of Crane.Market