Time-Out Timer - S-COM 6K Owner's Manual

TIMEOUT TIMER
Command Form:
Description:
Acknowledgement: OK
Errors:
? ERR 1
Default Condition:
Examples:
6K V1.02 03-16-91
AUTOPATCH
(PW) 65 (.1-54.6 min/000=infinity) *
This command programs the maximum duration of an autopatch call. After
the root number, enter 1 to 3 digits representing the desired time in tenths of
minutes. The range of the timer is 0.1 minutes to 54.6 minutes. Leading
zeros are not required, so entering 030 for 3.0 minutes is the same as
entering 30. Enter 000 for infinity (timer disabled).
wrong number of digits entered
? ERR 2 illegal digit entered or out of limit
3.0 minutes
To set the autopatch Timeout Timer to 4.5 minutes, enter the following:
(PW) 65 45 *
To set the autopatch Timeout Timer to infinity (disable the timer), enter the
following:
(PW) 65 000 *
93