Table of Contents
Advertisement
ACCESS/DUMP TRIGGERED MACROS
Command Form:
Description:
Acknowledgement: OK
Errors:
? ERR 1
Default Condition:
6K V1.02 03-16-91
AUTOPATCH
Access-Triggered Macro
Dump-Triggered Macro
The Accessed-Triggered and Dump-Triggered macro commands make the
autopatch more flexible. For example, a tape recorder can be turned on and
off by connecting it to a logic output. The tape recorder could be activated
or deactivated by the Autopatch Access and Dump macros. The tape
recorder can be located at a remote location from the repeater connected to
a CTCSS decoder and receiver on the repeater's output frequency. The
Autopatch Access and Dump macros can turn the controller's CTCSS
encoder on and off, and change its frequency.
NOTE: The Autopatch Dump Macro will be executed if the autopatch times
out. If a series of calls are made without dumping the autopatch between
calls, the Dump Macro will be executed at the end of the last call.
wrong number of digits entered
? ERR 2
illegal digit entered
no macros are assigned
(PW) 26 12 (macro name) *
(PW) 26 13 (macro name) *
79
Advertisement
Table of Contents
