S-COM 6K Owner's Manual page 170

Enables or disables the various Paths.
· Path 1 connects Receiver 1 to the Transmitter.
· Path 2 connects Receiver 2 to the Transmitter.
Command Form:
Command
Enable/Disable Path 1 (RX1 to TX1)
Enable/Disable Path 2 (RX2 to TX1)
Data Digit:
Digit Meaning
0 OFF (disabled)
1 ON (enabled)
Acknowledgment: Sends OK
Errors:
Error
? err 1
? err 2
6K V2.0 12-14-01
Enable/Disable Path
169
Form
(PW) 63 81 x *
(PW) 63 82 x *
Meaning
wrong number of digits entered
illegal digit entered
Default
ON (enabled)
ON (enabled)