Table of Contents
Advertisement
The autopatch can be dumped in three ways:
1.
You can enter the Autopatch Dump control code. This is not recommended, since
the control code contains a programming password that should be kept secure.
2.
You can enter the name of a macro you've programmed that contains the Autopatch
Dump control code. This is a recommended method.
3.
You can enter the "#" digit. This method only works if you wish to have a simple,
one-character dump code that has little security. The Pound (#) Down Dump feature is switchable
on or off.
Your controller has a large number of features that allow you to customize the operation of the
autopatch. This discussion is simply an overview of autopatch operation. The following pages will
discuss these features in detail.
6K V1.02 03-16-91
AUTOPATCH
67
Advertisement
Table of Contents
