S-COM 6K Owner's Manual page 81

FULL DUPLEX ON/OFF
Command Form:
Description:
Acknowledgement: OK
Errors:
? ERR 1
Default Condition:
Examples:
6K V1.02 03-16-91
AUTOPATCH
(PW) 63 07 (0=off/1=on)*
This command places the autopatch in or out of the full-duplex mode.
Normal operation of the autopatch is in half-duplex mode, which means
audio is gated from the phone line to the transmitter when the mobile is
listening, and gated from the receiver to the phone line when the mobile is
talking. Full-duplex operation means audio is gated both ways at the same
time, allowing the mobile to talk and listen simultaneously (assuming the
mobile is equipped with full-duplex RF gear). A disadvantage of full-duplex
operation is that the mobile cannot simply press the PTT button to quiet the
voice of the phone party. Note that if the Privacy feature is turned on, the
autopatch will be in half-duplex even if Full Duplex is turned on.
wrong number of digits entered
? ERR 2 illegal digit entered
off
To turn full-duplex on, enter the following command:
(PW) 63 07 1 *
80