S-COM 6K Owner's Manual page 88

RESTRICTIONS - ACCEPTED NUMBERS
Command Form:
Description:
Acknowledgement: OK
Errors:
? ERR 1
Default Condition:
Examples:
6K V1.02 03-16-91
AUTOPATCH
(PW) 68 (phone number/nothing = clear table) *
This command allows you to enter a phone number into the Accept Number
table. Up to 20 entries are permitted. The phone number may be a specific
number or it may contain one or more "A" characters as wildcards. Enter
only one phone number per command. Entering nothing after the 68 clears
the Accepted Number table.
wrong number of digits entered
? ERR 2 illegal digit entered (B, C, or D)
? FULL table is full
table is empty
To program all numbers in the 234 exchange into the Accepted Number
table, enter the following:
(PW) 68 234 AAAA *
To program all numbers in the 800 area code (toll free) into the Accepted
Number table, enter the following:
(PW) 68 234 AAAA *
To program 911 into the Accepted Number table, enter the following:
(PW) 68 911 *
To clear the Accepted Number table, enter the following:
(PW) 68 *
87