S-COM 6K Owner's Manual page 108

ID-TRIGGERED MACROS
Command Form:
Description:
Acknowledgement: OK
Errors:
? ERR 1
Default Condition:
Examples:
6K V1.02 03-16-91
IDENTIFIER
Impolite ID Macro
Initial ID Macro
Polite ID Macro
These commands assign macros to be triggered at the appropriate ID times.
Enter the 4-digit macro name desired. To delete the assignment, enter no
macro name.
wrong number of digits entered
? ERR 2 illegal digit entered
no macros assigned
ID-triggered macros may be used when it is desirable to play a cartridge
tape. For example, a macro may be created that pulses one of the logic
outputs; this is wired to the start line of a cartridge machine. That macro
may be programmed into the Initial ID Macro, so that the taped message
occurs only on initial IDs.
Assume that a macro 1200* is to be executed for an initial ID; macro 1201*
is to be executed for a polite ID; and macro 1202* is to be executed for an
impolite ID. The following command would be entered:
(PW) 26 03 1200 *
(PW) 26 04 1201 *
(PW) 26 05 1202 *
(PW) 26 05 (macro name) *
(PW) 26 03 (macro name) *
(PW) 26 04 (macro name) *
107