S-COM 6K Owner's Manual page 130

CHANGE CONTROL OPERATOR PASSWORD
Command Form:
Description:
Acknowledgement: OK
Errors:
? ERR 1
Default Condition:
Examples:
6K V1.02 03-16-91
SECURITY
(PW) 92 (new password) *
This command assigns a new password for Control Operators. The new
password may be 2, 4, or 6 digits in length, and may be any combination of
the numbers 0 through 9 and the letters A through D.
wrong number of digits entered
no password is assigned to Control Operators.
Assume that there is no Control Operator password, the default condition.
To make the Control Operator password 95, enter:
(PW) 92 95 *
So, if the Master password is 2A3B4C, enter:
2A3B4C 92 95 *
129