S-COM 6K Owner's Manual page 110

RESET INITIAL TO NORMAL
Command Form:
Description:
Acknowledgement: Sends the ID
Errors:
? ERR 1
Default Condition:
Examples:
6K V1.02 03-16-91
IDENTIFIER
(PW) 54 *
This command causes the Initial ID message to be the same as the Normal
ID message.
wrong number of digits entered
Both ID messages are the letters "ID"
On occasion, you may want to change the Initial ID message to something
special. For example, you could program W8ABC/R MRY XMAS, or
W2XYZ/R SWAPFEST SAT, etc. When the season or event is over, simply
enter:
(PW) 54 *
The Initial ID will now become the same as the Normal ID, which is probably
a short message. When another special message is desired for the Initial
ID, reprogram the Initial ID using the Callsign (Initial ID) command.
109