S-COM 6K Owner's Manual page 89

RESTRICTIONS - REJECTED NUMBERS
Command Form:
Description:
Acknowledgement: OK
Errors:
? ERR 1
Default Condition:
Examples:
6K V1.02 03-16-91
AUTOPATCH
(PW) 67 (phone number/nothing = clear table) *
This command allows you to enter a phone number into the Reject Number
table. Up to 20 entries are permitted. The phone number may be a specific
number or it may contain one or more "A" characters as wildcards. Enter
only one phone number per command. Entering nothing after the 68 clears
the Rejected Number table.
wrong number of digits entered
? ERR 2 illegal digit entered (B, C or D)
? FULL table is full
table is empty
To program all numbers in the 976 exchange into the Rejected Number
table, enter the following:
(PW) 67 976 AAAA *
To program all numbers in the 900 area code into the Rejected Number
table, enter the following:
(PW) 67 1 900 AAA AAAA *
To program 0 (operator) into the Rejected Number table, enter the following:
(PW) 67 0 *
To clear the Rejected Number table, enter the following:
(PW) 67 *
88