S-COM 6K Owner's Manual page 93

TIMEOUT TIMER - RESET
Command Form:
Description:
Acknowledgement: none
Errors:
Default Condition:
6K V1.02 03-16-91
AUTOPATCH
(PW) 81 *
This command resets the Autopatch Timeout Timer, allowing the autopatch
call to continue for another period of time as selected by the Autopatch
Timeout Timer command. If the call reaches the time limit, the controller will
terminate the call. When the timer is within 30 seconds of timing out, the
controller will start sending short (programmable) warning messages every 5
seconds.
none
none
92