S-COM 6K Owner's Manual page 82

MUTE DTMF TO PHONE LINE ON/OFF
Command Form:
Description:
Acknowledgement: OK
Errors:
? ERR 1
Default Condition:
Examples:
6K V1.02 03-16-91
AUTOPATCH
(PW) 63 08 (0=off/1=on) *
This command is used to allow or disallow DTMF to be passed from the
repeater receiver to the phone line. It does not affect the dialing of phone
numbers, since it is in effect after dialing is finished. The purpose of this
command is to prevent troublemakers from dialing a second phone number
after a called party hangs up. (Some exchanges return a second dial tone
under those conditions.) DTMF digits are detected and muted from the
phone line when this feature is turned on. It would have to be turned off,
however, when a mobile station wishes to call a number and remotely
control a device via DTMF.
wrong number of digits entered
? ERR 2 illegal digit entered
off
To turn on Mute DTMF to Phone Line, enter the following command:
(PW) 63 08 1 *
81