Enable/Disable Transmitter Minimum Unkey Delay
Enables or disables the transmitter minimum unkey delay.
· A Minimum Unkey Delay is normally observed on the transmitter to prevent
it from unkeying between software keying requests. If this delay is disabled,
the transmitter may drop out between messages or other activities that
require keying.
· The delay may be disabled in special applications (such as half-duplex
linking) where fast unkeying is desired.
Command Form:
Command
Enable/Disable TX1 Minimum Unkey Delay
Acknowledgment: Sends OK
Errors:
Error
? err 1
? err 2
Default Conditions: Minimum Unkey Delay is ON (enabled)
6K V2.0 12-14-01
Form
(PW) 63 31 x *
Meaning
wrong number of digits entered
illegal digit entered
181
Data Digit
0 = OFF (disabled)
1 = ON (enabled)