S-COM 6K Owner's Manual page 114

LANDLINE CONTROL TIMER
Command Form:
Description:
Acknowledgement: OK
Errors:
? ERR 1
Default Condition:
6K V1.02 03-16-91
LANDLINE CONTROL
(PW) 79 (1-546) *
This command is used to reload the landline timer. For example, if you will
be programming the controller and will need about ten minutes to do the
work, you may load the timer for ten minutes. The timer may be reloaded at
any time during that period, as well. Do not load the timer with a very long
period of time unless you need it, because if the phone line should become
disconnected, the controller will remain off-hook for the duration of the timer.
Enter one to three data digits in the range of 1 to 546, representing 0.1 to
54.6 minutes.
wrong number of digits entered
? ERR 2 illegal digit entered
none
113