List Macro - S-COM 6K Owner's Manual

LIST MACRO

Command Form:
Description:
Acknowledgement: sends the contents of the macro in CW
Errors:
? ERR 1
Examples:
6K V1.02 03-16-91
(PW) 33 (macro name) *
This command is used to examine the contents of a macro. Entering the
command causes the controller to send all stored digits in CW, with the
"*" character sent as a fraction bar (/).
The macro name must be entered using 4 digits. If the macro you wish to list
has a shorter name, enter leading zeros.
wrong number of digits entered
? NOT FOUND
Assume that a macro exists with the name 6A. It contains two commands:
one sends the time of day in CW, and the other sends the day and date in
CW. To make the example clearer, assume that the password is 99.
When the commands were originally placed into the macro, they looked like
this:
(PW) 14 1 *, and
(PW) 14 3 *
To list this macro, we would enter:
(PW) 33 006A *
The controller would then send:
9 9 1 4 1 / 9 9 1 4 3 /
MACROS
macro name does not exist in the directory
125