S-COM 6K Owner's Manual page 174

Select DTMF Long Tone Macros
Assigns a macro to be executed by the Long Tone shown.
·
Enter the password, the 4-digit root number, the macro you wish to have
executed by the long tone, and the (*).
·
If the macro has fewer than 4 digits, enter leading zeroes
·
If you wish to prevent a macro from being executed that was previously
assigned, enter just the password, the 4-digit root number, and the (*).
Command Form:
Command
Assign Macro to Long Tone Zero
Assign Macro to Long Tone One
Assign Macro to Long Tone Two
Assign Macro to Long Tone Three
Assign Macro to Long Tone Four
Assign Macro to Long Tone Five
Assign Macro to Long Tone Six
Assign Macro to Long Tone Seven
Assign Macro to Long Tone Eight
Assign Macro to Long Tone Nine
Assign Macro to Long Tone A
Assign Macro to Long Tone B
Assign Macro to Long Tone C
Assign Macro to Long Tone D
Assign Macro to Long Tone Star (*)
Assign Macro to Long Tone Pound (#)
Acknowledgment: Sends OK
Errors:
Error
? err 1
? err 2
Default Condition: No macros assigned
6K V2.0 12-14-01
Form
(PW) 26 50 (macro name) *
(PW) 26 51 (macro name) *
(PW) 26 52 (macro name) *
(PW) 26 53 (macro name) *
(PW) 26 54 (macro name) *
(PW) 26 55 (macro name) *
(PW) 26 56 (macro name) *
(PW) 26 57 (macro name) *
(PW) 26 58 (macro name) *
(PW) 26 59 (macro name) *
(PW) 26 60 (macro name) *
(PW) 26 61 (macro name) *
(PW) 26 62 (macro name) *
(PW) 26 63 (macro name) *
(PW) 26 64 (macro name) *
(PW) 26 65 (macro name) *
Meaning
wrong number of digits entered
illegal digit entered
173