S-COM 6K Owner's Manual page 179

Monitor/Talk Out Via Phone
Allows the control operator to monitor or join the repeater
conversation.
· These features are accessible from the phone line when in Phone Line
Control Mode.
· Enter one digit, 0 for OFF (disabled), 1 for ON (enabled).
· When the autopatch is dumped, the Monitor/Talk Out paths are disabled.
Command Form:
Command
Monitor Receiver #1 (Rx1)
Talk Out Transmitter #1 (Tx1)
Acknowledgment: Sends OK
Errors:
Error
? err 1
? err 2
Default Condition: All paths are disabled.
Examples:
The telephone caller (control operator) retains the DTMF decoder when
monitoring or talking out. The Select Phone Line Off-Hook Timer command
controls the length of the session. You may monitor the receiver, then enable
and disable talk out on the transmitter, during a conversation on the repeater.
6K V2.0 12-14-01
Form
(PW) 63 23 x *
(PW) 63 26 x *
Meaning
wrong number of digits entered
illegal digit entered
178
Data Digit
0 = OFF (disabled)
1 = ON (enabled)
0 = OFF (disabled)
1 = ON (enabled)