TRANSMITTER ENABLE/DISABLE
Command Form:
Description:
Acknowledgement: OK (enable only)
Errors:
? ERR 1
Default Condition:
6K V1.02 03-16-91
TRANSMITTER
(PW) 63 00 (0 = disable/1 = enable) *
This command is used to enable or disable the repeater transmitter. It does
not affect any repeater receiver functions. The receiver will still be able to
send commands to the controller, but the transmitter will not key. When the
transmitter is disabled, the controller will not key it under any conditions.
wrong number of digits entered
? ERR 2
illegal digit entered
enabled
140