Ring Redundancy - Siemens SCALANCE XB-200 Web Based Management

Configuring with Web Based Management
5.3 The "Information" menu
5.3.7.2

Ring redundancy

Information on ring redundancy
On this tab, you obtain information about the status of the device in terms of ring
redundancy. The text boxes on this page are read-only.
Description of the displayed values
The following boxes are displayed:
● Redundancy Function
The "Redundancy Function" box shows the role of the device within the ring:
– No Ring Redundancy (off)
– HRP Client
– HRP Manager
– MRP Client
– MRP Manager
56
The IE switch is operating without redundancy function.
The IE switch is operating as an HRP client.
The IE switch is operating as an HRP manager.
The IE switch is operating as an MRP client.
The IE switch is operating as an MRP manager.
Note
MRP configuration in STEP 7
If you set the role "Manager (Auto)" or "Manager" for the device in STEP 7, in both
cases, "MRP Manager" is displayed on this WBM page. In the display in the CLI, a
distinction is made between the two roles.
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02