Table of Contents
Advertisement
M
MMAC Local Management
ICRO
3.6
THE IPX GENERAL CONFIGURATION SCREEN
The IPX General Config screen enables you to configure the
MicroMMAC for IPX routing.
Access the IPX General Configuration screen by using the arrow keys to
highlight the IPX General Config option on the IPX Router Setup screen
and then pressing ENTER. The IPX General Configuration screen, shown
in Figure 3-7, displays.
Router Name: IPX
Version: XX.XX.XX
IPX Routing: ENABLED
Port: 1
Description: MicroMMAC EnetPort
MAC Address: 00-00-1D-22-46-B0
Oper Status: Enabled
IPX Address :0.0.0.0
+PORT-
Figure 3-7 The IPX General Configuration Screen
3.6.1
IPX General Configuration Status Fields
The following list describes each of the IPX General Configuration status
fields. The status fields are for informational purposes only and cannot be
modified.
Router Name
Displays the type of routing used.
Status
Displays the status of IPX Routing.
22
MicroMMAC Local Management
Status: Enabled
AdminStatusTime: 0 days 0 hours 39 min
System Level Setup
MTU: 1500
IPX Routing: DISABLED
MicroMMAC Local Management Routing Addendum
UpTime: 0 days 0 hours 39 min
Port Level Setup
Interf. Type: ethernet-csmacd
Framing: Novell
IPX Forwarding: DISABLED
SAVE
RETURN
2262_07
Advertisement
Table of Contents
