General Configuration Screen - Cabletron Systems Expansion module 6H122-08 User Manual

Chapter 5: Local Management
5.15

GENERAL CONFIGURATION SCREEN

The General Configuration screen,
system date and time, IP address and subnet mask, the default gateway,
the TFTP Gateway IP address, the Operational Mode, the Management
Mode, and the COM port configuration. The General Configuration
screen also allows the user to Clear NVRAM, and enable or disable IP
Fragmentation.
Access the General Configuration screen from the Module Configuration
Menu screen by using the arrow keys to highlight the GENERAL
CONFIGURATION menu item and pressing ENTER. The General
Configuration screen,
Event Message Line
Module Type: 6H122-08
Slot Number: X
MAC Address:
IP Address:
Subnet Mask:
Default Gateway:
TFTP Gateway IP Addr:
Operational Mode: [802.1D SWITCHING]
Com: [ENABLED]
Clear NVRAM [NO]
SAVE
The following briefly explains each General Configuration screen field:
MAC Address (Read-Only)
Displays the base physical address of the module.
5-40
Figure 5-18, displays.
6H122-08 LOCAL MANAGEMENT
General Configuration
00-00-ID-00-00-00
0.0.0.0
255.255.0.0
NONE DEFINED
0.0.0.0
Application:
IP Fragmentation [ENABLED]
Figure 5-18 General Configuration Screen
Figure 5-18, allows the user to set the
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
Module Date:
Module Time:
Screen Refresh Time:
Screen Lockout Time:
Module Uptime XX D XX H XX M
Management Mode: [DISTRIBUTED]
[LM]
EXIT
XX.XX.XX
10/11/97
14:23:00
30 sec.
15 min.
RETURN
6H122-08 User's Guide
2159_16