YASKAWA MA1440 Operating And Maintenance Manual page 83

Maintenance and inspection
Error message
error
[RS-232C communication]
Error code:55550017
error
[RS-232C communication]
Error code:55550018
error
[RS-232C communication]
Error code:55550019
error
[RS-232C communication]
Error code:55550020
Error occur
Finished! (Error occur)
Operator stop
Finished! (Operator stop)
The operator has pressed the
Stop key.
Error [Any axis don't set ABSO.]
Error code:55550088
Loop error
[Exceeding the maximal move-
ment pulse.]
Error code:55550097
Possible error
Error during the amplifier com-
munication
The reset will end due to an er-
ror.
The reset is ended with the
Stop switch.
Error in the zeroing processing
Error in the zeroing processing
Tab. 9-3: Error and solutions during resetting
Possible solution
Contact the local YASKAWA
branch office.
• Confirm the error message and
eliminate the error.
• Repeat the reset from the begin-
ning.
Repeat the reset from the begin-
ning.
Contact the local YASKAWA
branch office.
Contact the local YASKAWA
branch office.
-
9 83