Dansk Phantom Calibration - Mcube CubeScan BioCon-500 Service Manual

Service Manual for BioCon-500

8.5.3 Dansk Phantom Calibration

8.5.3.1 Preparing the Dansk phantom
No.
1
2
3
Mcube Technology Co., Ltd.
www.mcubetech.co.kr
TM
Figure Description
Place the Dansk phantom on a flat surface.
And open the cover of the phantom.
Pour water to the center surface of the
phantom.
Place the holder on the top of the Dansk
phantom.
Check if the holder is in a stable and flat
position.
Put the probe into the probe holder.
62