Mcube CubeScan BioCon-500 Service Manual page 8

Service Manual for BioCon-500
The system, in large, consists of a console, an ultrasonic probe, and a DC adapter
Component
DC Adapter
Console
Ultrasonic Probe
The Console consists of a printer module, a LCD module, a battery module, and a
number of boards. Its functions are as below.
Component
Charge Board
Battery Board
Analog Board
Connection Board
Key Board
Control Board
Battery Module
LCD Module
Printer Module
Mcube Technology Co., Ltd.
www.mcubetech.co.kr
TM
Supplies a DC power required in the Charge Board for charging
at the system.
Controls system operation and various signals, and handles
signal transmission and reception.
Transmits and receives the ultrasonic signals, being used in close
contact with the patient.
Charges the battery module with DC 16V input from a DC
adapter.
Connects the Charge Board and the Battery Module.
Transmits an ultrasonic pulse to the ultrasonic probe, processes
the signal just received, and transmits the data transferred
through the A/D converter to the control board. It also drives the
stepping motors required in imaging.
Input from a user.
Performs interfacing between the users and the system.
Controls the overall system with following major functions.
- Processes user' s input.
- Drives the stepping motor of the thermal printer and
transmits data
- Controls the charging of a battery module
- Interfaces PC through USB.
- Displays data on LCD
- Processes data received from the Analog Board
Provides the power required in the system.
Displays various information.
Prints the information about the bladder and bladder images on
the thermal paper
Function
Function
3