Ultrasonic Probe; Battery Module - Mcube CubeScan BioCon-500 Service Manual

Service Manual for BioCon-500

2.2 Ultrasonic Probe

Transmits the ultrasonic pulse in close contacts with the patient' s bladder and sends
the received signals reflected from the human body to the analog board band.
Ultrasonic probe consists of a transducer assembly, two motors used in adjusting
the location of a transducer assembly, and a switch board for receiving the scan
start input from the user. The product specification is as below.
The maximum value of the temporal average

2.3 Battery Module

Is a power source to supply the power to the system. And its specification is as
below.
Section
Configuration
Voltage
Operating
Temperature
Mcube Technology Co., Ltd.
www.mcubetech.co.kr
TM
Section
Output Power
The Working Frequency
6dB beam area
Transducer Dimension
(Specification of the Ultrasonic Probe)
Standard Charge
Standard Discharge
(Specification of the Battery Module)
Specification
1mW maximum
0.0313 mW/cm
14mm diameter
Specification
2S+2P
7.4V
0 to 45° C
-10 to 50° C
2.8MHz
5.85mm (H)
4.99mm (V)
2
17