Mcube CubeScan BioCon-500 Service Manual page 53

Service Manual for BioCon-500
6.7 No image is displayed after scanning.
No.
1
2
3
Mcube Technology Co., Ltd.
www.mcubetech.co.kr
TM
Check point Description
In this case, the mode showing the
scan result is set as CONTOUR.
Normal Image
Scanned image from open object (in
air)
Image when the
connection is open.
Check the resistance from the
ultrasonic probe connector to the
th th
18 and 20 pin
Error in transducer connection.
Retry after replacing the probe
Check if ' SCAN RESULT' is set as
' CONTOUR' .
Yes, retry after setting as ' B-MODE' .
No, request service
headquarter.
transducer
from the
48