Product Configuration; Maintenance Mode Password - Mcube CubeScan BioCon-500 Service Manual

Service Manual for BioCon-500

1. Product Configuration

1.1

Maintenance Mode Password

BioCon-500 has two system modes. One is Normal mode, and the other is
Maintenance mode. Normal mode is for the normal user, and Maintenance mode is for
the technicians in the hospital or service engineers. To enter the maintenance mode,
push LEFT key with ENTER key being pushed and then push PRINT key after the
system is turned on and the top screen is displayed in normal mode. When you press
' ENTER+LEFT+PRINT' keys, the BioCon-500 asks for the Maintenance mode
password (after the firmware version 3.1.009). Input ' 1122' for the password. You
cannot change the password.
Mcube Technology Co., Ltd.
www.mcubetech.co.kr
TM
1