Assembling Of The Console - Mcube CubeScan BioCon-500 Service Manual

Service Manual for BioCon-500

3.3.2 Assembling of the Console

The assembling of the Console takes the following steps. And the steps are
reversed for the disassembling.
Step
1 Connect the Key Board GND Cable to the Control Board
Connect the data cable and the backlight cable of the LCD Module
2
to the Control Board.
3 Connect the Key Board Cable to the Control Board.
4 Connect the Printer Cable to the Control Board.
5 Connect the LED Cable to the Charge Board.
Attach the ①Upper Case to the ②Lower Case by using the ⑤Flat
6
Head Bolts.
Insert the ④Battery module into the battery hole in the correct
7
direction.
Cover the ③Battery Cover by using the ⑤Flat Head Bolts
8
The picture of the assembled the Console is as below.
Mcube Technology Co., Ltd.
www.mcubetech.co.kr
TM
Description
(The Picture of the Console Assembled)
Remark
⑤ X 5EA
⑤ X 2EA
31