June 10th, 1997
4.1.11. DTMF Tone Test (Function 08)
Note: You must install the speaker (H5155049) and harness (H5235311) to
perform this test. (Refer to section 6.6.6)
1.
then immediately
2.
3.
4. Scroll through the available tests using
5.
6. To stop the test:
7. To finish:
4.1.12. Modem Detection Test (Function 08)
Note: This function can be used only when G3 bit switch 0B bit 5 (French
PTT requirements) is 1 in European models. It cannot be used in
USA models.
1.
then immediately
2.
3.
4. Scroll through the available tests using
5.
6. To stop the test:
7. To finish:
SERVICE TABLES AND PROCEDURES
SERVICE LEVEL FUNCTIONS
FUNCTION
SERVICE FUNCTIONS
0-NCU
2-DTMF
DTMF TEST
TONE
or
.
FUNCTION
SERVICE FUNCTIONS
0-NCU
2-DTMF
MODEM DET
V21 300BPS
or
4-7
KPAD/NEXT
1-MODEM
3-DETECT
START/<>
0
KPAD/NEXT
1-MODEM
3-DETECT
START/<>