Ricoh Aficio FX10 Service Manual page 117

SERVICE TABLES AND PROCEDURES
BIT SWITCHES
Communication Switch 06
No FUNCTION
Dialing requirements:
Germany
0
0: Disabled 1: Enabled
Dialing requirements: Austria
1
0: Disabled 1: Enabled
Dialing requirements:
2 Norway
0: Disabled 1: Enabled
Dialing requirements:
Denmark
3
0: Disabled 1: Enabled
Dialing requirements: France
4
0: Disabled 1: Enabled
Dialing requirements:
5 Switzerland
0: Disabled 1: Enabled
6-7 Not used
Communication Switch 07 - Not used (do not change the settings)
Communication Switch 08 - Not used (do not change the settings)
Communication Switch 09 - Not used (do not change the settings)
Communication Switch 0A
No FUNCTION
Point of resumption of
memory transmission upon
0 redialing
0: From the error page
1: From page 1
1-6 Not used
Emergency calls using 999
0: Enabled 1: Disabled
7
Communication Switch 0B - Not used (do not change the settings)
Communication Switch 0C - Not used (do not change the settings)
COMMENTS
These switches are automatically set to the settings
required by each country after a country code (System
Switch 0F) is programmed.
Do not change the settings.
COMMENTS
0: The transmission begins from the page where
transmission failed the previous time.
1: Transmission begins from the first page.
Do not change the settings.
If this bit is at 1, the machine will not allow you to dial
999 at the auto-dialer. This is a PTT requirement in the
UK and some other countries.
4-32
June 10th, 1997