Modem Test (Function 08) 4-6 - Ricoh Aficio FX10 Service Manual

SERVICE TABLES AND PROCEDURES
SERVICE LEVEL FUNCTIONS
2.
3.
4. Scroll through the parameters using
or . If you want to change a
value, enter the new value at the keypad,
then press
Example: Set NCU parameter 04 to 005.
5. To finish :
Note: Parameter CC is the Country Code, Parameter 01 is the Tx level.
Refer to section 4.3 for full details on NCU parameters.
4.1.10. Modem Test (Function 08)
Note: You must install the speaker (H5155049) and the harness (H5235311)
to perform this test. (Refer to section 6.6.6)
1.
then immediately
2.
3.
4. Scroll through the available tests using
5.
6. To stop the test:
7. To finish:
.
.
0-NCU
2-DTMF
NCU
NO.04 = 005
FUNCTION
SERVICE FUNCTIONS
0-NCU
2-DTMF
MODEM TEST START/<
800Hz
or .
4-6
June 10th, 1997
1-MODEM
3-DETECT
KPAD/<>
KPAD/NEXT
1-MODEM
3-DETECT
>