Ricoh Aficio FX10 Service Manual page 113

SERVICE TABLES AND PROCEDURES
BIT SWITCHES
Printer Switch 03
No FUNCTION
Length reduction of
received data
0: Disabled
1: Enabled
0
1-3 Not used
Page separation threshold (with reduction disabled in switch 03-0 above)
If the incoming page is up to x mm longer than the copy paper, the excess portion will
not be printed. If the incoming page is more than x mm longer than the copy paper,
the excess portion will be printed on the next page.
The value of x is determined by these four bits.
4
Hex value of bits 4 to 7
to
0
1
7
and so on until
F
Cross reference
Page separation and data reduction: section 2-2-12
Length reduction On/Off: Printer Switch 03, Bit 0
COMMENTS
0: Incoming pages are printed without length
reduction.
Cross reference
Page separation threshold: Printer Sw. 03, bits 4 to 7.
1: Incoming pages are reduced in the length direction
when printing.
Cross reference
Reduction ratio: Printer Switches 04/05
Page separation and data reduction: section 2-2-12
Do not change the settings.
x (mm)
0
1
15
4-28
June 10th, 1997